[ptx] Hugin: strange result after (trying to) make a panorama

Jean-Luc Coulon (f5ibh) jean-luc.coulon at wanadoo.fr
Sat Jun 26 11:38:40 BST 2004


Hi Claudio,

Le 25.06.2004 19:32:06, Claudio Soprano a écrit :
> Hi Jean,
> 
> Important thing, is to use the optimizer.
> 
> What i do is

I'm trying to follow this workflow.

> 
> 1) Creation of control points, usually i use autopano to do it , so  
> it found lot of them

Ok, I managed to do that with "autopano_old", I suppose it is suitable  
for the job. Anyway, I got a lot of matching points.

> 
> 2) Run hugin and load the project, set an anchor image,  set an  
> horizon (with control points) and do a simple pairwise optimize

Done it ...

> 
> 2b) Do Preview to remove black borders and center the panorama

Does the preview modify the final result ?

> 
> 3) check for distances, and fix or remove (the really bad ones)  
> control point long distance

Done it too. But I've some points with log distance (about 75 to 100)  
which are visually good. And probably necessary because without this  
point, I have nothing in some areas.

> 
> 4) Another optimize always pairwise

Ok

> 
> 5) do step 3/4 up to get a really good low distances medium

A nice loop ;-)

> 
> 6) Another Optimize for yqr

Done

> 
> 7) check for distances, and fix or remove (the really bad ones)  
> control point long distance

Done

> 
> 8) do step 6/7 up to get a really good low distances medium

Done. Is there a rule for low - medium - long ?
I'm sure 0?xx or 1.xx, 2.xx are low. But is 40 medium or long ?

> 
> 9) usually i dont do optimize for barrel distortion or view but if  
> necessary u can do

> 
> 10) do the panorama (cilindrical, multi tiff)
>

Here I've a problem with hugin.

I have a subdirectory pf my home directory called photos_300d
I have in it a suvdirectory called pano where I put the pictures I'm  
working it, the .pto file and the output from hugin.

1 - If I enter JPG for the image choice
it asks me the name in the pano subdirectory.
I enter pano.jpg
As a final result, I get a pano.jpg empty file and a pano.JPG  
(uppercase) with the striched result.

2 - If I enter multi TIFF
it iasks me for a name
I enter pano without an extension
as the final result I gent an empty pano file and *in my home  
directory* a file called photos_300D.TIFF which contains a picture with  
the right image, there is room (transparent) at the left where the  
middle and left images are supposed to be. I never got the 3 TIFF  
images I expected to have.

> 11) enblend the multi tiffs

Well, dur to the previous problem I didnt try it ...

> 
> this is how i create a panorama
> 
> hope can help u
> 
> Claudio Soprano
>

---
regards
		- Jean-Luc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://www.email-lists.org/pipermail/ptx/attachments/20040626/fccb4725/attachment.bin


More information about the ptX mailing list