[ptx] problem when .pto file created by autopano_v103_linux

[Emmanuel Favre-Nicolin]

When I load a hugin project file (.pto), it ends up with an error after 
loading all photos :

hugin: OptimizePanel.cpp:282: void OptimizePanel::setOptimizeVector(const 
PT::OptimizeVector&): Assertion `(int)optvec.size() == 
m_yaw_list->GetCount()' failed.
Aborted

the beginning of the project file looks like that (I don't know what's the 
problem, I don't have the last version of hugin, Imay try to install it but 
with mandrake it is not straightforward...) :

more pano0.pto

# Hugin project file
# generated by Autopano

# Panorama settings:
p w8000 h1200 f2 v250 n"PSD_mask"

# input images:
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060060.jpg"
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060061.jpg"
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060062.jpg"
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060063.jpg"
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060064.jpg"
o f0 y00.000000 r00.000000 p00.000000 u20 d0.000000 e0.000000 v70.000000 
a0.000000 b0.000000 c0.000000 w2288
 h1712 
n"/home/manu/Documents_perso/tmp/Package_Source/autopano_v103_linux/pano0/p6060065.jpg"

# Control points:
c n0 N1 x512 y1384 X875 Y720
# Control Point No 0: 1.00000
c n0 N1 x1197 y243 X193 Y207
# Control Point No 2: 1.00000
c n0 N1 x1216 y1072 X237 Y1087
# Control Point No 4: 1.00000
c n0 N1 x1670 y451 X701 Y451
# Control Point No 6: 1.00000
c n0 N1 x1328 y976 X360 Y983
# Control Point No 8: 1.00000
c n0 N1 x1784 y432 X816 Y432
# Control Point No 10: 1.00000
c n0 N1 x2078 y1433 X1103 Y1401
# Control Point No 12: 1.00000
c n1 N2 x1055 y345 X127 Y237